Fluna Tec Gun Coating liquid 100ml

Categories: , ,
Availability

6 in stock

13,90 
Availability

6 in stock

SKU: FT-7005700

Description

Ceramic High Performance Coating
Fluna GunCoating is a ceramic high performance coating for all types of firearms and knives.
Despite extreme lubricity, Fluna GunCoating is residue-free, it forms an invisible dry film on the gun and increases the sliding properties of moving parts on the gun.
Hard, metallic noise from rubbing parts - such as those on bolt action rifles - is significantly reduced.
Fluna GunCoating forms a strong bond with the surface, does not run off and thus protects the gun from corrosion in the long term.
Fluna GunCoating can be applied to all surfaces such as steel, plastic, lacquered wood parts, gold and silver ornaments, color hardenings, cast iron and rubber.
Fluna GunCoating smoothes out microscopic cracks and grooves and permanently smoothes the treated surfaces. Wear is thus reduced to a minimum and the shooting performance of the gun is increased.
Fluna GunCoating is effective from the first treatment - even on older weapons!

Attributes
Suitable for knives and all types of firearms
Can be applied to any surface
Transparent, residue-free, non-greasy coating
Very good gliding properties, long-lasting effect
Salt and fresh water resistant, economical in use
High temperature resistance from -40 °C to +750 °C
Does not resinify, does not stick, is colorless and odorless
Cleaning of the gun is facilitated

Instructions for use
Fluna GunCoating is always applied to the cleaned gun. Metal parts should be degreased before application so that the ceramic particles can adhere directly to the metal. Use Fluna Gun Degreaser for degreasing. Fluna GunCoating is sprayed thinly onto the surfaces and then spread with a lint-free cloth so that a thin, damp film covers the surface. Fluna GunCoating then dries off automatically. The coating is dry after approx. 30min at room temperature and completely hardened after approx. 2 hours. When applying to the barrel, make sure that the barrel is thoroughly cleaned beforehand. Then apply Fluna GunCoating thinly with absorbent cotton or a felt plug. For large-area maintenance, the aerosol spray is recommended. For coating small parts and adjusting the triggers, the liquid product in the dropper bottle should be used.

Additional information

Weight0.150 kg